HIGH ON THE QUALITY – LOW ON THE BUDGET.

Economically sound Heated Floors Heavenly Heat EasyWire, is made of high quality heating cable.

EasyWire

EasyWire is designed for heating bathrooms, sunrooms, basement remodeling, or any other place where warming the floor provides greater comfort. EasyWire can be used as a surface warming system for specific zoned floor areas.

Floor Structure

The below diagram illustrates the way to apply EasyWire heating system in different floor structures.

Floor Structure

EasyWire comes in different heat requirement strengths from 10 to 20 Watt per square foot, depending on the heat requirement of the room. Use 10 Watt per square foot for secondary comfort heating, while the use of 20 Watt per square foot is recommended for primary room heating. Flexible “clip strips” are attached at the edge of the room. The EasyWire is then stretched between the two opposing strip edges at a fixed spacing to create a heating grid.

The EasyWire will conform to the shape of any room, going around difficult obstacles while creating a perfect heating grid that is highly economical. The cold leads are 8 feet long, for easy electrical installation. The cold leads are 14AWG copper cable with a double layer of PVC insulation. Rated at 105C

Repair kits are offered for accidental damages to the heating element cable during installation.

Easy Wire

IMPORTANT – DO NOT CUT HEATING ELEMENT CABLE.

Easy Wire Features

EasyWire operates on ordinary current already in your home (120V/240V)EasyWire flexible design makes it easier to work around existing fixtures or cramped floor layouts.
EasyWire underfloor heating systems are perfect for either remodeling or new construction applications.EasyWire can be used as either Primary or Secondary source of heating.
The installation of EasyWire is easy and friendly. Minimal tooling such as a hammer and nails are required to complete the installation.The floor temperature thermostats allow for independent regulation of each heating zone.
EasyWire radiates gentle warmth through a network of low profile cables just below the floor. EasyWire radiant heating element is 1/8″ thick, so it will not affect floor levels.EasyWire is delivered complete with installation instructions designed for “Do It Yourself” in mind.

HIGH ON THE QUALITY – LOW ON THE BUDGET.