Heated Driveway Installation, Straight From the Manufacturer

When winter routinely drops to bone-cracking cold, a heated driveway has to work every single time, which makes the quality of the system and the people behind it non-negotiable. We manufacture our own snow melting mats and cables, size each system specifically for Manitoba conditions, and back the installation with genuine technical support. Nothing is outsourced to a distributor or left to guesswork on site. Here is why Winnipeg homeowners choose Heavenly Heat:

  • Canadian-made for Canadian winters. We manufacture our snow melting mats and cables and ship across Canada, so your Winnipeg driveway heating system is built with custom layouts and correctly sized heating elements — engineered for extreme cold, with factory-direct value and real technical support.
  • Fully automated snow melting. A temperature sensor detects snow and switches the system on, then off once the surface is clear. It works quietly in the background through the harshest weather, so your driveway stays clear without a shovel, a plow, or a single early-morning trip outside.
  • Custom layouts and tire tracks. Heat the full driveway surface or choose a cost-effective tire-track layout that warms only your wheel paths. We tailor full coverage or custom tire track layouts to your driveway size, so you get the performance you need without paying to heat every square foot.
  • Built to last and safe by design. Our heavily jacketed snow melting cables resist installation damage, include a built-in damage alarm, and are installed with GFEP protection for safe operation, delivering the best performance through Winnipeg’s long, deep freeze.

Every mat, cable, and layout comes from us, not a middleman. Share your driveway size and surface and we will size a system and send a free Winnipeg quote — request yours here.

Engineered for the Coldest Driveways in the Country

Winnipeg winters are relentless. Heavy, frequent snowfall and some of the deepest, longest cold snaps in the country mean driveways fill in fast and stay frozen for months. Shovelling large areas by hand is exhausting and time-consuming, plows leave hard-packed windrows at the end of the drive, and salt does little once temperatures plunge well below freezing. A heated driveway is built for exactly these conditions.

Electric heating elements sit just below the concrete, asphalt, or pavers and warm the surface enough to melt snow as it falls and stop ice from forming — a temperature sensor runs them only when snow is detected. Because the heat is delivered at the surface and the system responds instantly, your driveway stays ice-protected and clear no matter how much snow arrives, and your concrete, asphalt, or pavers are spared the freeze-thaw and salt damage that shorten a driveway’s life.

Matching Snow-Melting Mats and Cables to Your Driveway

Our electric systems are the core of a Winnipeg heated driveway, and they come in two forms. The right one depends on your driveway’s shape, surface, and budget:

  • Snow melting mats — the heating cable comes pre-spaced on a mesh for fast, even installation across regular-shaped driveways, giving dependable full coverage with minimal installation time.
  • Snow melting cables — loose cable lets us adjust spacing on site to follow custom layouts, tight curves, and tire track designs, making it ideal for irregular driveways or for concentrating heat exactly where you want it.

Both are energy efficient, quick to install, and simple to maintain, with the fast response that matters when heavy snow arrives fast. Hydronic systems, which circulate heated fluid from a boiler, can suit very large areas but cost more upfront and add mechanical complexity — for most Winnipeg driveways, an electric system is the more cost-effective, reliable choice, whether it goes into new construction or an existing surface.

Full Coverage or Tire Tracks? Sizing Your System and Your Budget

You do not have to heat every square foot of a Winnipeg driveway. A full-coverage layout melts the entire surface; a tire-track layout heats only the two strips your wheels follow, giving you clear traction while cutting both installation cost and energy use — a popular choice on larger driveways. Either way, heated driveway cost in Winnipeg typically runs about $14 to $24 per square foot installed, and roughly $120 to $250 per winter to run a 1,000 sq ft driveway, since the system only draws power when the sensor detects snow.

Your final quote comes down to a handful of factors: your driveway size, the surface material, full coverage versus tire tracks, the state of your existing surface and base, and any custom layout for irregular shapes. Against years of shovelling, plowing, salt, and freeze-thaw repairs, a heated driveway is a sound, energy-conscious investment that also lifts curb appeal and property value. Send us the details and we will prepare an accurate quote up front.

How a Heated Driveway Compares to Shovelling, Plowing, and Salt

For a Winnipeg winter, it helps to see the options side by side:

What mattersShovelling, plowing & saltHeated driveway
Winter effortRepeated shovelling or waiting on a plow after every stormFully automatic, melting snow as it falls
Ice controlSalt and sand, far less effective in deep coldHolds the surface above freezing so ice never bonds
Surface wearSalt and freeze-thaw pit and crack concrete and paversNo salt needed and far less freeze-thaw stress
Ongoing costYearly salt, bags, and plow or snow-removal feesAbout $120 to $250 per winter for a 1,000 sq ft driveway
Extreme coldPerformance drops off as temperatures fallSized and installed for Manitoba’s deep freeze

The gap only widens each winter: traditional methods cost you time and money on every snowfall and slowly wear down the surface, while a heated driveway works on its own and protects your investment for the long term.

Safe, Automatic Operation With GFEP Protection

Installation depends on your driveway. In new construction, snow melting mats or cables are embedded as the concrete, asphalt, or pavers are laid — often the best time to plan for even soil compaction and a clean install. For an existing surface, the system is added during resurfacing or a rebuild, and pavers can be lifted and reset over the heating layer.

As the manufacturer, we supply the custom layout, drawings, and correctly sized heating elements, and a licensed electrician completes the connection with GFEP (ground-fault equipment protection) so the fully automated system operates safely and to code. Once it is in, there is nothing to switch on and nothing to service — the sensor runs the system for you, all winter long.

What’s Included With Your Heated Driveways Winnipeg

Every Winnipeg installation from Heavenly Heat covers the full job:

  • A custom system layout and drawings sized to your driveway
  • Your choice of snow melting mats or cables, in a full-coverage or tire-track design
  • An automatic temperature sensor that runs the system only when snow is detected
  • GFEP-protected wiring completed by a licensed electrician
  • Manufacturer technical support from the first layout to the final test
  • Optional walkway, step, and roof de-icing added on the same project

There are no hidden extras — the layout, the components, and the technical support all come from the same Canadian manufacturer.

Is a Heated Driveway Right for Your Winnipeg Home?

A heated driveway makes the most sense if:

  • You are tired of shovelling heavy, frequent Winnipeg snowfalls
  • Your driveway is long, sloped, or awkward to plow
  • Someone in your home has mobility or safety concerns in winter
  • You are already building or resurfacing a driveway
  • You want to protect concrete or pavers from salt and freeze-thaw damage

One Manufacturer for Your Driveway, Roof, and Pipes

In a climate as harsh as Winnipeg’s, protection should not stop at the driveway. Heavenly Heat Inc. has manufactured electric floor heating and snow melting systems for more than a decade, and the same technology extends across your property.

Our snow melting mats and cables install under walkways, steps, and ramps to keep every surface safe; our roof de-icing systems prevent the heavy ice dams and icicles that build through a long Manitoba winter; and our pipe freeze-prevention and pipe tracing systems keep water lines from freezing and bursting in extreme cold.

Bundled together, it is one fully automated defence against snow, ice, and moisture — built and backed by a single Canadian manufacturer with a technical team supporting your installer from first layout to final test.

Keeping Up With Winnipeg’s Heaviest Snowfalls

A common question in Winnipeg is whether a heated driveway can truly keep pace with the city’s heaviest storms. It comes down to correct sizing. Because we manufacture the elements, we design the system’s heat output and cable spacing around your driveway and Manitoba’s conditions, so it melts snow steadily even during sustained snowfall rather than falling behind. The temperature sensor keeps the system running through the storm and shuts it off once the surface is clear, and a full-coverage layout leaves no gaps where snow can pack down. For very heavy-use or larger driveways, we adjust spacing and output accordingly. Properly sized and installed, a heated driveway handles Winnipeg’s worst without a shovel in sight.

Request Your Free Winnipeg Heated Driveway Quote

Done shovelling Winnipeg’s snow? Tell us your driveway size and surface and we will design a custom snow melting system and send a free quote. Heavenly Heat Inc. manufactures in Canada and ships nationwide — contact us for the best system, the best value, and reliable installation support in Winnipeg.

FAQs

How much does a heated driveway cost in Winnipeg?

A heated driveway in Winnipeg typically costs about $14 to $24 per square foot installed, and roughly $120 to $250 per winter to run a 1,000 sq ft driveway. Choosing a tire-track layout over full coverage lowers both the installation and operating cost.

Do heated driveways work in Winnipeg's extreme cold?

Yes. Our electric snow melting systems are sized and installed for Manitoba’s deep freeze, keeping the driveway surface warm enough to melt snow and stay ice-protected. Electric systems respond quickly, which matters when heavy snow arrives fast.

Snow melting mats or cables — which should I choose?

Snow melting mats install quickly across regular-shaped driveways, while loose snow melting cables suit custom layouts, curves, and tire-track designs. We recommend the option that best fits your driveway’s shape, surface, and budget.

What is a tire-track layout?

Instead of heating the whole driveway, a tire-track layout warms only the two strips your wheels follow. It gives you clear traction while reducing installation cost and energy use, which is popular for larger Winnipeg driveways.

Can I add a heated driveway to my existing driveway?

Yes. The system can be installed during resurfacing of an existing concrete or asphalt driveway, and pavers can be lifted and reset over the heating layer, so a brand-new driveway is not always required.

Are heated driveways safe?

Yes. Our snow melting cables are heavily jacketed and installed with GFEP (ground-fault equipment protection), and a licensed electrician completes the connection so the fully automated system operates safely and to code.

  • Easy Mat
  • Easy Wire
  • Thermostat
floor-heating-systems
Floor Heating 130 SQ FT System Easy Mat Underfloor Easy Installation 120 V or 240 V
floor-heating-systems
Floor Heating 130 SQ FT System Easy Mat Underfloor Easy Installation 120 V or 240 V
floor-heating-systems
Floor Heating 100 SQ FT System Easy Mat Underfloor Easy Installation 120 V or 240 V
floor-heating-systems
Floor Heating 10 SQ FT System Easy Mat Underfloor Easy Installation 120 V or 240 V
floor-heating-systems
Floor Heating 50 SQ FT System Easy Mat Underfloor Easy Installation 240V
floor-heating-systems
Floor Heating 20 SQ FT System Easy Mat Underfloor Easy Installation 240V
Easy Wire
Floor Heating 140-165-186 SQ FT240V System Easy Wire Underfloor Heating Cable, Floor Sensor, Plastic Cable Clips
easy-wire
Floor Heating 9-10-11 SQ FT120V System Easy Wire Underfloor Heating Cable, Floor Sensor, Plastic Cable Clips
easy-wire
Floor Heating 16-20-23 SQ FT240V System Easy Wire Underfloor Heating Cable, Floor Sensor, Plastic Cable Clips
easy-wire
Floor Heating 24-30-32 SQ FT240V System Easy Wire Underfloor Heating Cable, Floor Sensor, Plastic Cable Clips
easy-wire
Floor Heating 30-35-40 SQ FT120V System Easy Wire Underfloor Heating Cable, Floor Sensor, Plastic Cable Clips
easy-wire
Floor Heating 40-45-53 SQ FT240V System Easy Wire Underfloor Heating Cable, Floor Sensor, Plastic Cable Clips
TH115-Front-View-1
Honeywell TH115-AF/TH115-GB
Description
Specification
  • Single point connection
  • Twin conductor cable
  • Silent, efficient, and safe
  • Emits zero EMF
  • Easy and Flexible installation
  • Durable construction

Cable Construction: Twin conductor
Rated Voltage : 120V,208V,240V,277V,347V,480V,600V
Output : 12W/ft (40W/m)
Heating Element Size : 35′(10.7m) to 940′(286.5 m)
Bending radius: 1.5″ (38mm)
Cable Diameter: 1/4″ (6.5mm)
Conductor Insulation: Fluoropolymer and XLPE
Outer Insulation: PVC
Max. rated Temp.: 220℉(105℃)
Min. Installation Temp.: 40℉(5℃)
Cold lead 16ft length

Learning Center

Heated Floor Cost in Toronto

Heated floor cost in Toronto: 2025 Price Guide

Expect to pay anywhere between $6 and $16 per square foot. So, how much is this in reality? Well, let’s say that you need…

Why is underfloor heating not working

Why is My Underfloor Heating Not Working? Solutions and Tips to Fix It

If your underfloor heating system is underperforming—or not working at all—you’re not alone. The most common reasons underfloor heating stops working include a faulty…

Installing snow melting system before snowfall

How Do Snow Melting Mats Work: The Complete Breakdown

Snow melting mats are a highly effective and energy-efficient way to keep outdoor surfaces safe and clear throughout the winter season. Using integrated electrical…

0